Back to Board Index
Back to Board Index
Forum help
| Fsopen server "failed to open to network" | |
Jean-luc Hiriart Server  5th Sep 2013 10:40:45 | Hello, I'm French, I use google translator to ask you questions, so sorry if there are mistakes in ortographes. when I run fsopen server, I get a message "failed to open to network."
I have opened the ports 6112-6122. I have install winpcap. I'm on windows server 2008 r2. thank you for your response |
Dave Wave   5th Sep 2013 15:50:20 | How is the server come yes to the internet? |
| Jean-luc Hiriart Server 5th Sep 2013 18:17:06 | thank you for your quick response, I have a dedicated server at 1and1, a Franco-German host. 100 Mbit / s down. windows server 2008 r2. I test without firewall too but I have the same message. I also tried deleted from the registry, but it is similar. I also disable the Cisco protection. same. I no longer understand |
| Dave Wave 5th Sep 2013 20:17:14 | Jean-luc, I suspect that you have a fixed external ip address on your server or possibly fsx traffic is going through a proper firewall and packets in/out are being changed which makes it difficult for me to work out what interface to listen to.
Please can you send me a diagram of your network showing everything between your server and the internet and ipv4 assigned addresses to dave@fsopen.co.uk |
| Dave Wave 6th Sep 2013 14:53:34 | As suspected this was because Jean-luc is running a dedicated server on an isp that has a complicated network setup. I've put a special bit of code in for their server so it should now work ok. |
Andrew Boucher  9th Sep 2015 17:56:59 | hello, I am ruining this software on a VPS and having the same issue it wont open at all |
| Dave Wave 10th Sep 2015 10:48:48 | Can users connect to the fsx session ok?
Is it just fsopen server that fails to pick up users joining? Confirm you are running standard fsx not steam edition? |
You need to Log on to post a reply. |
Forum help