Back to Board Index
Back to Board Index
Forum help
| IP adress? | |
Zack Iddo   12th Nov 2011 00:15:03 | where do I find the password and username for my IP address because when I try to use open control it asks me for my user name and password can you help ? |
Joe Clifford   12th Nov 2011 01:13:33 | Sounds to me that your using '192.168.1.1' which is your default gateway (Router).
You need to look for you IPv4 address. Go to cmd > ipconfig/all > press enter. Scroll down to find your IPv4. Type that in! thats what open control uses! rgrds Joe |
| Zack Iddo 12th Nov 2011 10:51:19 | ok thanks joe |
| Zack Iddo 12th Nov 2011 11:08:14 | actually when i go to type in the IPv4 address it says on all browsers that it cannot be found |
Dave Wave   12th Nov 2011 13:17:08 | Can you paste here the url you are entering
It should look something like http://192.168.0.5 Remember your ip address may change on rebooting depending on your setup. |
| Zack Iddo 12th Nov 2011 17:30:47 | http://192.168.1.20 |
| Dave Wave 12th Nov 2011 17:35:17 | Sounds like you need to make a change on your firewall on your pc. You need to allow inbound tcp on port 80. |
| Zack Iddo 12th Nov 2011 17:52:17 | can you do it if i send you my teamviewer details |
Steff Missot 12th Nov 2011 17:54:45 | Are you in TS zack? |
| Dave Wave 12th Nov 2011 18:00:50 | Not today. Steph will sort you out |
| Steff Missot 12th Nov 2011 18:11:46 | Problem Solved!
Added new rule for port 80 in the firewall. Teamviewer is also using port 80 for some reason, so make sure you eliminate that whole process. Seems to be working now for Zack!:) |
You need to Log on to post a reply. |
Forum help